Uphill / Downhill; Steep Downhill - Cub Cadet Yanmar SC2400 Operator's Manual

1. Before approaching a slope, set the range shift
lever to the slow position.
(A) Range shift lever
(a) Slow position
2. Lightly depress the forward side of the forward
and reverse drive pedal to start moving.
IMPORTANT:
●Always slowly drive the tractor on a slope.
3. ALWAYS travel slowly on a slope.
4. Drive the tractor according to the type of a slope,
as instructed below:

■ Uphill / Downhill

Make sure that the range shift lever is in the slow
position. Run the engine at a lower speed.

■ Steep Downhill

To be able to apply the engine brake, turn the range
shift lever to the slow position.
(A) Forward and reverse drive pedal
Sc2400 Operator's Manual
8. OPERATING THE TRACTOR
3014919a
3014916b
8-16
(a)
(A)
(A)