Engaging The Cruise Control; Disengaging The Cruise Control - Cub Cadet Yanmar SC2400 Operator's Manual

NOTE:
●The cruise control is operative only when the
tractor is traveling forward.
WARNING
Avoid injury:
●Use the cruise control only when traveling in a
vast open area.
●Turn OFF this feature before turning the tractor
or when in areas that include many obstacles.

■ Engaging the Cruise Control

1. Depress the forward side of the forward and
reverse drive pedal until an intended travel speed
is reached.
2. Lift up the cruise control lever to engage the
cruise control feature.
3. Remove foot from the forward side of the forward
and reverse drive pedal.
4. Remove hand from the cruise control lever.
(A) Forward side of the forward and reverse drive
pedal
(B) Cruise control lever

■ Disengaging the Cruise Control

1. Depress the brake pedal.
2. Step on the forward side of the forward and
reverse drive pedal and make sure the forward
and reverse pedal is unlocked.
NOTE:
●The cruise control is disengaged when the operator
depresses the brake pedal.
●If the cruise control lever is not readily disengaged,
then step on the brake pedal several times.
●Also, the cruise control can be disengaged when
the operator depresses the forward side of the
forward and reverse drive pedal. Note, however,
that the reverse side of the forward and reverse
drive pedal can not be used for this purpose.
●Do not strongly step on the reverse side of the
forward and reverse drive pedal when the cruise
control is in the locked state.
8. OPERATING THE TRACTOR
3014903i
8-7
(A)
(B)
Sc2400 Operator's Manual