Table of Contents
Advertisement
Therefore, place the filling hose in the
#
plastic bag that contained the TIREFIT
kit.
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre-
sponsible disposal
Tire sealant contains pollutants.
Have the tire sealant bottle disposed of
#
professionally, e.g. at an authorized
Mercedes-Benz Center.
Stow the tire sealant bottle and the tire infla-
#
tion compressor.
Pull away immediately.
#
Stop driving after approximately ten minutes
#
and check the tire pressure using the tire
inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tire pressure not being attained
If the specified tire pressure is not reached,
the tire is too badly damaged. The tire sealant
cannot repair the tire in this instance.
The braking and driving characteristics may be
greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
In cases such as the one mentioned above, con-
tact an authorized Mercedes-Benz Center. Or call
1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
Correct the tire pressure if it is still at least
#
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the B‑pillar on
the driver's side or the tire pressure table in
the fuel filler flap for values.
To increase the tire pressure: switch on the
#
tire inflation compressor.
Breakdown assistance 315
To reduce the tire pressure: press pressure
#
release button
1
next to manometer 2.
When the tire pressure is correct, unscrew the
#
filling hose from the valve of the sealed tire.
Screw the valve cap onto the valve of the
#
sealed tire.
Pull the tire sealant bottle out of the tire infla-
#
tion compressor.
The filling hose stays on the tire sealant bottle.
Drive to the nearest qualified specialist work-
#
shop and have the tire, tire sealant bottle and
filling hose replaced there.
Advertisement
Table of Contents
