Table of Contents
Advertisement
Turn the combination switch to the corre-
#
sponding position 1 - 5.
í Single wipe: press button
1
#
the point of resistance.
î Wiping with washer fluid: press button
#
1
beyond the point of resistance.
%
Observe the notes on washing the vehicle in a
car wash (
page 300).
/
Changing the windshield wiper blades
& WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windshield wipers
#
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
Switch the vehicle on and then off again
as far as
#
immediately.
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
The wiper arms will move into the replacement
position.
Removing the wiper blades
Fold the wiper arms away from the windshield.
#
page 130).
/
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
far as it will go.
2
Slide catch
#
until it engages in the removal position.
Remove the wiper blade from the wiper arm in
#
the direction of arrow 4.
Light and visibility 131
1
as
3
in the direction of arrow
Advertisement
Table of Contents
