Kenmore 68610/1 Owner's Manual page 39

Microwave hood combination
Table of Contents

Advertisement

Available languages

Available languages

Replacing
the cooktop
and oven lights
The cooktop
light
1. Unplug microwave
oven or disconnect
power.
2. Remove the bulb cover mounting screw and
carefully remove
the cover.
Mounting
screw
3. Replace bulb(s) with candelabra-base
30-watt
bulb(s) (Part No. 4393681) available from your
Sears Service Center.
4. Plug inmicrowave
oven or reconnect
power.
The oven light
1. Unplug microwave oven or disconnect power,
2. Remove the two vent grille mounting
screws
located above the cover
(the two outer screws).
5. Replace the bulb with a candelabra-base
30-watt bulb (Part No. 4393681) available from
your Sears Service Center.
6. Close the bulb cover.
7. Slide the top of the vent grille into place. Push
I
I the b°tt°m
until it snaps
into place. Replace the
mounting
screws.
3. Tip the grille forward, then lift out to remove.
8. Plug in microwave oven or reconnect power.
4. Lift up the bulb cover.
39

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

68610/2

Table of Contents