Kenmore 68610/1 Owner's Manual page 12

Microwave oven features
@ @
@
®
Your microwave oven is designed to make your
cooking experience as enjoyableand productiveas
possible. To help get you up and runningquickly,
the following is a list of the oven's basic features:
1. Door Handle. Pullto open door.
2. Door Safety Lock System. The oven willnot
operate unlessthe door is securelyclosed.
3. Window with Metal Shield. Shield prevents
microwaves from escaping. It is designed as a
screen to allow you to view food as it cooks.
4. Cooking Rack. Use for extra space when
cooking in more than one containerat the same
time. See page 16 for more information.
5. Glass Turntable (Part No. 4393754) (not
shown). Included in oven cavity - see below
for installationinstructions.This turntable turns
food as it cooks for more even cooking. It must
be in the oven during operationfor best cooking
results. The turntable is sunken into the cavity
floor to give you more cooking space and better
cooking results. See pages 8, 11, 37, 42, end 44
for more details.
6. Charcoal and Grease Rltere. Included in oven
cavity. See page 38 for installationinstructions
end cleaning information.
7. Cooktop/Countertop Light. Turn on to light your
cooktop or countertop or turn on as a night light.
See page 17 for more information.
8. Cooking Guide Label. Use as a quick reference
for Auto Cook, Auto Reheat, Auto Defrost,
Popcorn, Beverage, Baked Potato, Frozen
Vegetable, and Frozen Entree settings.
9. Exhaust Fan and Cooktop Light Switches.
See page 17 for more information.
10. Control Panel. Touch the pads on this panel to
perform all functions. See pages 13-15 for more
information.
11. Vent Grille.
12. Oven Cavity LlghL
13. Microwave Inlet Cover.
14. Model and Serial Number Plate. See page 44
for more information.
To install turntable and support:
• Fit the hub (PN 4393754 onto the shaft.
Raised,
curved_
Hu t=_
_3"-v_-.--Shall
• Place the support
(PN 4393752) on the
cavity bottom.
• Place the turntableon
the hub. Make sure the
raised, curved linesin
the center of the
turntable bottom are
between the three
"spokes" of the hub.
• The rollers(PN 4393753) on the supportshould fit
inside the ridge on the bottom of the turntable.
• The turntable turns both clockwise and counter-
clockwise. This is normal.
12