Kenmore 68610/1 Owner's Manual page 18

Setting the clock
When your microwave oven is first plugged in, or
after a power failure, the display willflash ":". If a
time of day is not set, ":" will flash until you touch
any pad.
1. Touch CLOCK.
NOTES:
• If you touch in an invalidtime and touch CLOCK,
3 tones willsound. Enterthe correct time.
• ff you touch OFF/CANCEL while settingthe clock,
the display will show the last time of day set.
• To turn off the clock, touch CLOCK, Number pad
0, and CLOCK again, the set time will disappear
and ":" will show on the display.
TOUCH
YOU SEE
2. Enter the time of day.
Example for 12:00:
YOU SEE
3. Complete your entry.
TOUCH YOU SEE
18