Level 2 Service Manual
Removing and Replacing the Side Grips
6881040B85
1.
Remove the rear housing cover, battery, and endo housing as described in the
procedures.
2.
Hold the front housing assembly by the top and bottom ends.
3.
Lift the side grip on each side out of the front housing as shown in Figure 9.
Figure 9. Removing and Replacing the Side Grips
4.
To replace, align the side grip to the front housing as shown in Figure 9.
5.
Slide the side grip into position.
6.
Repeat steps 5 and 6 for the other side grip.
7.
Replace the endo housing, battery, and housing cover as described in the
procedures.
July 19, 2002
Disassembly
A
B
020444o
21