Disassembly
Removing and Replacing the Microphone
26
1.
Remove the rear housing cover, battery, antenna, endo housing, and front endo
housing, as described in the procedures.
2.
Use the pointed end of the plastic tweezers to release the microphone from the
frond endo housing as shown in Figure 14. The microphone should come away
easily.
Figure 14. Removing and Replacing the Microphone
3.
To replace, place the microphone into its location on the front endo housing.
Ensure the microphone contacts are facing upward as shown in Figure 14.
4.
Replace the endo front housing, antenna, endo housing, and rear housing cover
as described in the procedures.
July 19, 2002
020450o
6881040B85