Disassembly; Removing And Replacing The Battery Cover And Battery - Motorola MOTORAZR2 V9 Service Manual

Wcdma 850/1900, wcdma 2100 gsm 850/900/1800/1900 mhz edge, gprs

Hide thumbs Also See for MOTORAZR2 V9:

Table of Contents

Disassembly

The procedures in this section provide instructions for the disassembly of V9

telephones. Tools and equipment used for the phone are listed in Table 1, preceding.

Many of the integrated devices used in this equipment are vulnerable to damage

from electrostatic discharge (ESD). Ensure adequate static protection is in place

when handling, shipping, and servicing the internal components of this equipment.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

All batteries can cause property damage and/or bodily injury, such as burns if a

conductive material, such as jewelry, keys, or beaded chains touch exposed termi-

nals. The conductive material may complete an electrical circuit (short circuit) and

become quite hot. Exercise care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

Ensure the phone is turned off.

Push the battery cover up (toward the top of the phone) to release (see Figure 1).

Figure 1. Removing the Battery Cover

Lift up and remove the battery cover.

September 12, 2007

MOTORAZR 2 V9

Battery Cover

v477852

6809513A83-O

Table of Contents