Playback Mode; Selecting Surround Or Stereo Playback; Enjoying Cinema Dsp Programs - Yamaha YSP-4100 Owner's Manual

TV AV
TV AUX 1 AUX 2
HDMI 1 HDMI 2 HDMI 3
HDMI 4 iPod RADIO
ENTER
MOVIE MUSIC TAINMENT OFF
E
CINEMA DSP
F
SURROUND STEREO
G
ENTER ENTER
TOP MENU MENU
I
OPTION OPTION SETUP SETUP RETURN RETURN
TV VOL CH VOLUME
TV TV
MUTE INPUT MUTE
UNIVOLUME SUR. DECODE INTELLIBEAM
1 2 3
4 5 6
7 8 9
0 +10
ENT
CODE SET
TUNING PRESET CATEGORY
INFO MEMORY SLEEP
You can select the playback method (surround or stereo), desired CINEMA DSP program and decoder to enjoy playback
of the input source.
Use to select the playback method (surround or stereo).
See also: " Enjoying CINEMA DSP programs" (page 22),
"Changing the audio output method for surround
playback" (page 23).
Press FSURROUND or FSTEREO.
You can enjoy high realistic sensation with surround
playback and hi-fi sound with stereo playback.
ECINEMA DSP
y
• Normal sounds (not sound beams) are output from the front
EOFF
FSTEREO
FSURROUND
GENTER
• When the stereo playback is selected, CINEMA DSP (page 22)
G
/
G
/
G
ISETUP
This unit is equipped with a Yamaha CINEMA DSP
22
En
Status
When PCM signals are being
input
When Dolby TrueHD signals are
being input
When Dolby Digital Plus signals
are being input
When Dolby Digital signals are
being input
When Dolby Pro Logic is
selected as the surround decoder
When Dolby Pro Logic II is
selected as the surround decoder
When Dolby Pro Logic IIx is
selected as the surround decoder
When DTS HD Master Audio
signals are being input
When DTS HD High Resolution
signals are being input
When DTS digital signals are
being input
When DTS 96/24 signals are
being input
When DTS ES discrete is
selected as the surround decoder
When DTS ES matrix is selected
as the surround decoder
When DTS Neo:6 is selected as
the surround decoder
Selecting surround or stereo
playback
right and front left channels. When you play back multi-channel
sources, all signals except those from the front right and left
channels are mixed down and output from the front right and
left channels.
and the decoder (page 24) become ineffective.

Enjoying CINEMA DSP programs

y
Indicator
• You can select an audio signal to be played back (Auto or DTS)
In "Decoder Mode" (page 32).
PCM
■ Input channel indicators
DIGITAL
PL
Depending on the channel component of the current
digital input signal, the input channel indicators in the
front panel display light up as follows:
PL
2-channel stereo
+ HD + MSTR
5.1-channel
+ HD + HI RES
6.1-channel
+
7.1-channel
+ ES + DSCRT
y
+ ES + MTRX
• Extra (EX1/EX2) indicators light up when 7.1-channnel signals
recorded in a Blu-lay disc (etc.) are being input. Normally,
+ Neo:6 surround back channel signals are recorded in the extra
channels. This may vary depending on the disc.

Playback mode

(digital sound field processing) chip containing several
sound field programs used to enhance your playback
experience. Most of the CINEMA DSP programs are
precise digital recreations of actual acoustic environments
of famous concert halls, music venues, and movie theaters.
y
• When you enjoy the CINEMA DSP programs, press F
SURROUND to select the surround playback, and then follow
the steps below.
• The CINEMA DSP programs are not available in the following
conditions.
– Stereo playback is selected.
– HD audio signals are being played back.
– Audio signals with sampling frequency of higher than 96 kHz
are being played back.
– Audio signals are output from the PRE OUT jacks.
Center
Front L
L C R
Surround L
SL SB SR
Extra 1
EX1 LFE EX2
LFE
Input signal
Surround back
Front R
Surround R
Extra 2
Indicator