Preparation; Installation - Yamaha YSP-4100 Owner's Manual

PREPARATION

This section describes a suitable installation location to install this unit using a wall mount bracket, a rack, a table top stand or a floor stand. To
achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams
(page 11). Depending on your installation environment, connections with external components (page 12) should be done before installation.
Notes
• Make sure you leave an adequate amount of ventilation space so that heat
can escape. We recommend installing this unit using a wall mount bracket, a
rack, a table top stand or a floor stand.
• Be sure to install this unit where it will not fall subject to vibrations, such as
from an earthquake, and where it is out of the reach of children.
• When using a cathode-ray tube (CRT) TV, do not install this unit directly
above your TV.
• If the picture on your TV screen becomes blurred or distorted, we
recommend moving this unit away from your TV.
■ Attach the stands
Attach the supplied stands to this unit as shown below. Make sure that
you attach the left and right stands correctly. These stands are
unnecessary if you use the optional wall mount bracket.
Right stand (supplied)
Screws (for stands, supplied)
Note
• Depending on a rack, table top stand, or floor stand, the stands may not be
necessary.
■ Using a rack
You can install this unit either above or under your TV in a
commercially available rack.
It should be large enough to allow adequate ventilation space around
this unit and strong enough to support the weight of both this unit and
your TV.
When this unit is installed above your TV
TV
This unit
When this unit is installed under your TV
10
En

Installation

Left stand (supplied)
■ Using a wall mount bracket
You can use the optional wall mount bracket (such as SPM-K30) to
mount this unit on the wall in your listening room.
Attachment of the wall mount bracket: refer to the owner's manual
supplied with the wall mount bracket.
This unit
Dimensions when using SPM-K30
YSP-5100
235 355
26
24- 7x22
74
SPM-K30 (Option)
150 355
26
24- 7x22
74
YSP-4100
■ Using a table top stand or a floor stand
You can mount both your TV and this unit on a commercially
available table top stand or floor stand.
Wall mount bracket
TV
355 235
4- 7
730
355 150
4- 7
730 (mm)
18
107
(mm)