Playback Features; Playback; Playing Back Sources; Playing Back Tv Sounds - Yamaha YSP-4100 Owner's Manual

PLAYBACK FEATURES

Playing back sources

This section describes how to playback source input from
your external components. For details on your external
components, refer to the owner's manual supplied with
each component.
1
Press CPower (p) key to turn on this unit.
2
Turn on external components (TV, Blu-ray
disc player, etc.) connected to this unit.
3
Press one of the DInput selector keys to
select an external component as an input
source.
Input source name
HDMI1
y
• You can change the input source name displayed on the
front panel display (page 38).
4
Start playback of the external component
that you have selected as the input source,
or select a radio station on the tuner.
• FM tuning (page 25)
• Playing back iPod/iPhone (page 30)
5
Press KVOLUME +/– to adjust the volume.
Volume
Volume 40
6
Press CPower (p) key to turn this unit to the
standby mode.

Playing back TV sounds

1
Select the desired TV channel.
2
Press DTV to select the TV as the input
source.
3
Mute the sound output on the TV.

Playback

Playing back a player

1
Select the player as the video input on the TV.
2
Press DHDMI1-4 or DAUX1/2 to select the
player as the input source.
For example, if the player is connected to the HDMI
IN 1 jack of this unit, press DHDMI1.
3
Start playback of the player.
4
Mute the sound output on the TV.
y
• If your player supports the HD audio, check whether the audio
output setting on the player is set to the value which supports
HD audio output ("Auto", "Bitstream", etc.).
• If your player does not support the HD audio, check whether the
audio output setting on the player is set to multi-channel linear
PCM.
• If your player is connected to this unit through the digital
connection, check whether the audio output setting on the
player is set to digital output ("Bitstream", "Dolby Digital",
"DTS", etc.).
• To enhance the surround sound effect, set the audio setting of
your player to the multi-channel audio mode.
• You can use the supplied demonstration DVD to check the
digital signals being input from the player through the digital
connection (HDMI, optical or coaxial). The
indicator lights up when this unit detects the digital audio signal
input.

Muting audio output

1
Press KMUTE to mute the audio output.
2
Press KMUTE again to resume audio output.
Decoder and input channel
indicators
■ Decoder indicators
Depending on the input source and the selected decoder,
the indicators in the front panel display light up as follows:
Changing OSD
language
AUTO SETUP
(IntelliBeam)
Using the system
memory
Playback
Playback mode
FM tuning
SIRIUS Satellite
Radio™ tuning
Playing back iPod™
DIGITAL
Useful features
21
En