Related Manuals for NCR 7772-K241
Summary of Contents for NCR 7772-K241
- Page 1 Solid State Drive (SSD) Kit Instructions 7772-K241/K253/K255 Issue G Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited...
-
Page 2: Copyright
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. -
Page 3: Table Of Contents
Table of Contents Copyright Solid State Drive (SSD) Kit Contents Installation Procedure NCR CX7 All-in-One POS (7772)/NCR CX5 All-in-One POS (7773) NCR CX8 POS (7736) Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited. - Page 4 Aug 2020 Added installation procedure for CX8 (7736) Jan 2021 Added K256 Aug 2021 Updated PNs for K253 and K255 Removed K256 Dec 2021 Added Warning statement Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
-
Page 5: Solid State Drive (Ssd)
Solid State Drive (SSD) This kit provides a Solid State Drive for: NCR CX7 All-in-One POS (7772) or NCR CX8 POS (7736) 7772-K241 – 120GB SSD 7772-K253 – 240GB SSD 7772-K255 – 480GB SSD NCR CX5 All-in-One POS (7773) 7772-K241 – 120GB SSD Confidential and proprietary information of NCR Corporation. -
Page 6: Kit Contents
Apacer 480GB 4-channel BiCs4 NVMe M.2 Module (PNPE1B3A) 7772-K256 480GB NVMe 4-channel SSD 006-8627556 Screw, M3x4mm Phillips, Low Profile, Black 006-8627767 Storage, Apacer, 480GB M.2 42mm NVME PCIe Gen3 X4 Module Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited. -
Page 7: Installation Procedure
Installation Procedure Warning Disconnect the AC power cord from the AC outlet and wait 30 seconds before servicing the terminal. NCR CX7 All-in-One POS (7772)/NCR CX5 All-in-One POS (7773) 1. Lay the Display face down on a flat surface. Note Always use a soft material (cloth, foam) to protect the display screen when placing the terminal face down. - Page 8 Remove the Ethernet Cable from the Cable Management Hook then disconnect the Cable. 4. Loosen the two (2) captive screws that secure the Back Cover to the Display. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 9 5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 10 7. Secure the M.2 SSD to the Motherboard with a screw. Note When installing the secondary M.2 SSD in M.2 Port 2, ensure cables are not pinched by the SSD and the SSD’s mounting screw. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
-
Page 11: Ncr Cx8 Pos
Top Cover without Duct — Remove the four (4) screws securing the Top Cover to the chassis. Top Cover with Duct a. Remove the four (4) screws securing the Top Cover to the chassis. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited. - Page 12 There are two M.2 Ports on the Motherboard. The primary M.2 SSD should be installed in the M.2 Port 1, and the secondary M.2 SSD (for dual media) should be installed in the M.2 Port 2. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 13 3. Secure the M.2 SSD to the Motherboard with a screw. 4. Reinstall the Top Cover. Top Cover without Duct – Install the Top Cover on the chassis using four (4) screws. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 14 Slide the Top Cover in the direction shown to align the screw holes of the Cover with the screw holes of the chassis. c. Secure the Top Cover with four (4) screws. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.