Advertisement
Quick Links
Advertisement
Related Manuals for NCR Blk7
Summary of Contents for NCR Blk7
- Page 1 Kit Instructions Peripheral Integration, Blk7, XR6 7603-K507 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
-
Page 3: Revision Record
Revision Record Issue Date Remarks May 2021 First Issue... - Page 5 NCR USB Big Ticket Keyboard, NCR Compact Alphanumeric POS Keyboard, or no keyboard configuration. The Peripheral Integration kit include all the parts needed for integrating most NCR peripherals with the XR6 terminal, with the following important exceptions: • For a 64-key POS Keyboard, order tray insert 7459-K325 (available in beige only) •...
-
Page 6: Kit Contents
7603-K507 Peripheral Integration, Blk7, XR6 Kit Contents... - Page 7 497-0509618 Assembly, Bezel, Integration, Blk7, XR6 497-0511268 Bracket, Tray Support, XR8 Integration 497-0427333 Customer Display Post, Blk7, 7606 497-0427258 Filler Cap For No Customer Display, Blk7, 7606 497-0526168 Rubber Foot (6 pcs) 006-8611339 Screw-Ph Phillips (8-32X.375) (14 pcs) 006-8624432 Screw, M4X6, Black, Pan, Sems (4 pcs)
-
Page 8: Installation Procedures
7603-K507 Peripheral Integration, Blk7, XR6 Installation Procedures Installing and using the Peripheral Integration kit involves the following procedures: 1. Assemble the Integration kit. For more information, refer to Assembling the Integration on the facing page. 2. Install the XR6 terminal into the Integration Chassis. For more information, refer to Installing the Terminal on page 8... - Page 9 7603-K507 Peripheral Integration, Blk7, XR6 Assembling the Integration Kit 1. Attach the six rubber feet to the bottom of the chassis.
- Page 10 7603-K507 Peripheral Integration, Blk7, XR6 2. Install the Tray Support Bracket. The side with more Display Pole mounting holes must be near the back of the chassis. a. Position the Tray Support Bracket onto the chassis. b. Align the mounting holes on the bracket with the mounting holes on the chassis,...
- Page 11 7603-K507 Peripheral Integration, Blk7, XR6 3. Install the Integration Tray. a. Position the Integration Tray on top of the chassis and bracket assembly. b. Align the mounting holes on the tray with the mounting holes on the chassis and the bracket, and secure the tray using six #8 Phillips screws.
-
Page 12: Installing The Terminal
7603-K507 Peripheral Integration, Blk7, XR6 Installing the Terminal 1. Assemble the Integration Mount Bracket and the Power Supply Mount Bracket. 2. Mount the XR6 terminal onto its mounting bracket. a. Place the terminal upside down on a flat surface. b. Position the mounting brackets assembly on top of the terminal. - Page 13 7603-K507 Peripheral Integration, Blk7, XR6 3. Turn the assembly back into its upright position and install the Power Supply Unit (PSU). a. Insert the PSU into its mounting bracket. b. Connect the DC Extension Cable. • Connect the Molex connector or the extension cable to the Molex connector of the PSU.
- Page 14 7603-K507 Peripheral Integration, Blk7, XR6 c. Connect the AC Power Cord to the PSU and use a cable tie to secure the cable to the mounting bracket. 4. Slide the terminal and PSU assembly into the chassis, and tighten the two thumbscrews to secure the assembly to the chassis.
-
Page 15: Installing The Bezel
7603-K507 Peripheral Integration, Blk7, XR6 Installing the Bezel 1. Turn the Key to the unlocked position. 2. Insert the Bezel hooks into their slots on the front of the chassis. 3. Pivot the Bezel upward until it snaps into position. -
Page 16: Installing Peripherals
• A keyboard well filler is available (7459-K318 Charcoal Gray) in order to provide a flush surface for large third-party keyboards that exceed the width of the Integration Tray. • The NCR peripherals listed below are physically NOT supported within an integrated XR6 configuration: • PS/2 Big Ticket Keyboard •... -
Page 17: Installing The Keyboard
7603-K507 Peripheral Integration, Blk7, XR6 Installing the Keyboard Keyboard installation varies depending on the type of keyboard used. Note: For configurations without a keyboard, refer to No Keyboard on page 16 1. Insert the Keyboard Cable into the cable access hole on the front of the Integration... - Page 18 • For NCR Compact Alphanumeric Keyboard with MSR, use the narrow filler (item #14 on the Contents). • For NCR Compact Alphanumeric Keyboard without MSR, use the wide filler (item #15 on the Contents). • For NCR 64-Key POS Keyboard, use kit 7459-K325.
- Page 19 7603-K507 Peripheral Integration, Blk7, XR6 Connecting the Keyboard Cable The 7603 supports USB and PS/2 type keyboards. See the following examples of supported configurations. USB Keyboard and USB Mouse PS/2 Keyboard and USB Mouse Note: PS/2 Extension Cables cannot be used on PS/2 Keyboards with a Glide Pad.
- Page 20 7603-K507 Peripheral Integration, Blk7, XR6 USB Keyboard w/Glide Pad No Keyboard If a keyboard is not used, install the Integration Tray Plug onto the cable access hole on the front of the Integration Tray.
- Page 21 7603-K507 Peripheral Integration, Blk7, XR6 Installing the Transaction Printer The NCR 7167, 7168, 7197, 7198, or 7199 printer can be located on either side of the Integration Tray. Note: The Printer Cable Strain Relief is different on the Release 1.0 and the Series II printers.
- Page 22 7603-K507 Peripheral Integration, Blk7, XR6 2. Connect the Printer Cable to the USB and Power connectors. 3. If installing a Series II printer, route the cable through the Cable Strain Relief on the printer as shown in the following image.
- Page 23 • For NCR 7197/7198/7199, first install the Printer Skirt, route the cable out the back of the terminal, and then set the printer in the Integration Tray. • For NCR 7167/7168, route the cable through the Cable Strain Relief and then set the printer in the cabinet.
- Page 24 7603-K507 Peripheral Integration, Blk7, XR6 Connecting Printer Cables The printers can connect through a USB connector or an RS-232 connector. It receives power through a Powered USB power cable. USB Installation Connect the Powered USB Printer Interface Cable to the USB Connector and Power...
- Page 25 7603-K507 Peripheral Integration, Blk7, XR6 RS-232 Installation 1. Connect the RS-232 Printer Interface Cable to the RS-232 connector on the printer and to a non-powered RS-232 connector on the terminal. Note: The factory default setting for the RS-232 ports is powered. See the Appendix: Powered Serial Port Settings.
- Page 26 To install a DynaKey, Touch, and LCD Operator Display, the Black Integration Tray Display Mount (5968-K024) kit is required. Note: The Operator Display shown in the following images is the NCR 5954 DynaKey. The installation procedures for different operator displays are nearly identical. The primary differences are with cable connections.
- Page 27 7603-K507 Peripheral Integration, Blk7, XR6 Display Mount Back Plate 24604...
- Page 28 7603-K507 Peripheral Integration, Blk7, XR6 2. Secure the Operator Display Base (included in 5967-K024) to the Tray Support Bracket using four screws. 3. Route the cables through the Display Arm as shown below. Display Cover Display Arm Display Base 21202b 4.
- Page 29 7603-K507 Peripheral Integration, Blk7, XR6 7. Insert the Display Back Plate into the Operator Display Arm. 8. Route the display cables down through the cable routing slot on the front of the Tray Support Bracket. 9. Connect the Display Cable to the terminal. For more information, refer to the following sections: •...
- Page 30 7603-K507 Peripheral Integration, Blk7, XR6 Connecting NCR 5943/5967 12-inch LCD Cables The following illustrations show the cable connections for the 5943 LCD and the 7603 terminal. There are two cables required. • VGA or DVI cable for video • Powered Universal Serial Bus (USB) for data and power VGA/DVI Connections Connect either a VGA or a HDMI to DVI cable.
- Page 31 Connect the Powered USB Cable to the 5943 LCD and to one of the 12V Powered USB connectors on the 7603 terminal. For more information see: • NCR RealPOS 5943 12" LCD User Guide (B005-0000-2043) • NCR RealPOS 5967 12" LCD User Guide (B005-0000-2182)
- Page 32 7603-K507 Peripheral Integration, Blk7, XR6 Connecting NCR 5943/5967 15-inch LCD Cables The following illustrations show the cable connections for the 5943 LCD and the 7603 terminal. There are two cables required. • VGA or DVI cable for video • Powered Universal Serial Bus (USB) for data and power VGA/DVI Connections Connect either a VGA or an HDMI to DVI cable.
- Page 33 Connect the Powered USB Cable to the 5943 LCD and to one of the 12V Powered USB connectors on the 7603 terminal. For more information see: • NCR RealPOS 5943 15" LCD User Guide (B005-0000-2182) • NCR RealPOS 5967 15" LCD User Guide (B005-0000-2193)
- Page 34 7603-K507 Peripheral Integration, Blk7, XR6 Connecting NCR 5954 USB DynaKey Cables The DynaKey connects to the terminal via two cables. • DVI or VGA cable for video • Powered Universal Serial Bus (USB) for data and power VGA/DVI Cable Connections...
- Page 35 7603-K507 Peripheral Integration, Blk7, XR6 Powered USB Cable Connections Connect the Powered USB Cable to the DynaKey and to one of the Powered USB connectors on the terminal.
-
Page 36: Installing The Customer Display
7603-K507 Peripheral Integration, Blk7, XR6 Installing the Customer Display The Customer Display may be installed either on the front or rear end of the Tray Support Bracket. If a SpacePole arm is used for the display head and the SpacePole mounting holes should use the inner mounting holes of the bracket, install the Customer Display on the front end. - Page 37 7603-K507 Peripheral Integration, Blk7, XR6 2. Route the display cable down through the Customer Display Post and through the cable routing slot on the front of the Tray Support Bracket. 3. Insert the display into the Customer Display Base. 4. Connect the Display Cable to the terminal. For more information, refer to...
- Page 38 Note: The factory default settings for the COM1 and COM2 ports are powered by default. To change a port to non-powered, refer to Powered Serial Port Settings in the NCR RealPOS XR6 (7603) User Guide (B005-0000-2400). Configure the terminal serial port as follows:...
- Page 39 7603-K507 Peripheral Integration, Blk7, XR6 No Customer Display If a customer display is not used, install the Filler Cap onto the Customer Display Post.
- Page 40 The Cash Drawer can be installed remotely or integrated with the terminal. The Cash Drawer Cable is then connected to the Cash Drawer connector on the terminal. Note: The NCR 2181 Cash Drawer, with its smaller footprint, is required for the integrated configuration.
- Page 41 The Cash Drawer can be installed remotely or integrated with the terminal. The Cash Drawer Cable is then connected to the Cash Drawer connector on the terminal. Note: The NCR 2181 Cash Drawer, with its smaller footprint, is required for the integrated configuration.
- Page 42 7603-K507 Peripheral Integration, Blk7, XR6 Installing a Second Drawer The 7603 supports a 2-drawer configuration with a Y-cable (1416 C372 0006).
- Page 43 7603-K507 Peripheral Integration, Blk7, XR6 Installing the Swing Arm Skirts 1. Install the Left Swing Arm Skirt and snap it into place.
- Page 44 7603-K507 Peripheral Integration, Blk7, XR6 2. Align the Right Swing Arm Skirt with the Left and snap it into place.
-
Page 45: Installing The Cable Cover
7603-K507 Peripheral Integration, Blk7, XR6 Installing the Cable Cover Caution: Ensure that no cables are pinched. 1. Slide the Cable Cover onto the hinges on the back of the chassis. 2. Pivot the Cable Cover upward until both of its latches have properly engaged.