Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7736-K022
Summary of Contents for NCR 7736-K022
- Page 1 Kit Instructions Dual DB9 Serial Daughtercard 7736-K022 Issue A...
-
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. -
Page 3: Kit Contents
Dual DB9 Serial Daughtercard This kit provides a Dual DB9 Serial Daughtercard for the NCR CX8 POS (7736). Note: BIOS M17 or later is required if using the Dual DB9 Serial Daughtercard on the following CX8 models: • 7736-1100-xxxx • 7736-1300-xxxx •... -
Page 4: Installation Procedure
Dual DB9 Serial Daughtercard Installation Procedure 1. Remove the Top Cover. • Top Cover without Duct a. Remove the four (4) screws securing the Top Cover to the chassis. • Top Cover with Duct a. Remove the four (4) screws securing the Top Cover to the chassis. - Page 5 Dual DB9 Serial Daughtercard b. Slide the Top Cover in the direction shown. c. Lift the Top Cover away from the chassis. 2. Remove the Front Panel Blank from the I/O Ports side of the chassis (2 screws).
- Page 6 Dual DB9 Serial Daughtercard 3. Install the Dual DB9 Serial Daughtercard and Bracket Assembly on the inside of the chassis (2 screws). 4. Connect the USBC Cable to the Daughtercard and Motherboard.
- Page 7 Dual DB9 Serial Daughtercard 5. Connect the Header Cable to the Daughtercard and Motherboard. 6. Reinstall the Top Cover.