Power Source - Excell FJ5 Service Manual

EXCELL PRECISION CO., LTD.
Panel:
LED Display
 5 digits, red 7-segment display, 25.4 mm height.
 Multi-display: Weighing mode / Partial External Calibration / Battery status display,
Gross, Net, Hold, and Power-saving status display.
Status Indicators
"Charging" indication. The indicator shows "Red" while charging and shows
"Green" after completing the charging cycle.
:
During charging
"Low Battery" indication. When the indicator flashes, the battery needs to be
:
recharged.
"Unit" indication. The first unit is active when the indicator is on. The second
kg / lb :
unit is enable when the indicator is off.
ZERO : "Zero" indication.
TARE : "Tare" indication.
STABLE : "Stable" indication.
 When the "-" symbol is displayed across all displayed digits, the scale is in its power-saving
mode. Press any key or place an object on the hook to continue weighing.
 The crane supports three units including kg, lb and t. Use
to demand.
 If the first unit and the second one are the same, the "unit" symbol won't response.
Explanations above are EXCELL Standard Edition.

1-3 Power Source

Power Selection
 6 V / 10 Ah rechargeable battery
 Input AC 110 V / 230 V (± 10%)
Output DC 10 V / 1000 mA adaptor
Power Consumption
Full load
Power-saving mode
The fully charged battery can be used up to around 120 hours.
Low Battery Indicator
When the indicator

The scale will be power off automatically after 1 to 2 hours and enters into self-protection
mode if the battery is not charged. Please fully recharge the battery before using the scale
again.
45046
red light  red and green light green light
:
: DC 80 mA ± 10% (System + Load Cell),
: DC 40 mA ± 10%.
flashes, the battery needs to be recharged for more than 10 hours.
8
to set according
ZSME300000343