Table of Contents
Advertisement
@ To use each timer mode in conjunction
For example, to go to sleep listening to a FM broadcast, and _
wake up the next morning listening to a compact disc.
1. Make a play timer setting for a compact disc.
(Follow steps 1 to 6 on pages 64-65.)
2. Tune in your desired band and station, and adjust the volume
level.
3. Press CLOCK/TIMER to select SLEEP timer, and set the sleep
time.
For example, to go to sleep listening to a compact disc, and
then to make a timer recording from a radio broadcast.
1. Make a record timer setting.
(Follow steps 1 to 5 on pages 66-67.)
2. Play a compact disc, and adjust the volume level.
3. Press CLOCK/TIMER to select SLEEP timer, and set the sleep
time.
Be sure to set the sleep timer off before the timer recording will
begin.
For example, to make a timer recording from a radio broadcast
while sleeping, and wake up the next morning listening to a
cassette tape.
1. Make a record timer setting.
(Follow steps 1 to 5 on pages 66-67.)
2. Make a play timer setting for deck 1.
Be sure to set the timer recording off before the timer play will begin.
' For example, to go to sleep listening to a tape, and wake up the
next morning listening to a compact disc, and make a timer
recording from a radio broadcast while going out.
1, Make a record timer setting.
(Follow steps 1 to 5 on pages 66-67.)
2 Make a play timer setting fora compact disc.
Be sure to set the play timer off before the timer recording will
begin.
3. Start playing a tape in deck 1, and adjust the volume level.
Be sure to select "c.>" reverse mode.
4. Press CLOCK/TIMER to select SLEEP timer, and set the sleep
time.
Timer sequence of priority
Sleep timer, record timer, play timer is the timer operation of priority
in order. Be sure not to make each timer setting overlap.
If programmed times overlap among play timer, record timer and
sleep timer settings, timer operation is as follows:
When the record timer and the sleep timer setting has over-
lapped:
The sleep timer setting has priority, so the record timer will not
function.
23:30
0:30
SLEEP TIMERL______]
REC TIMERF-----—-—— zl
0:00
1:00
When record timer and play timer setting has overlapped:
The record timer setting has priority, so the play timer will not
function.
5:00
6:30
RECTIMERL_
PLAY TIMERF----~——— 4
6:00
7:00
When the OFF (or ON) time of the record timer and the ON (or
OFF) time of the play timer is same, both timer will function.
Imp
Advertisement
Table of Contents
