Vertex Standard VX-110 Operating Manual page 37

Set Item 24 [ TN SET ]
Function: Setting of the CTCSS Tone Frequency
Available Values: 39 standard CTCSS tones
Default: 100 Hz
In this mode, press the [ F ] key, then press the PTT key, to save the new setting and exit to
normal operation.
Set Item 25 [ DCS SET ]
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes.
Default: 023
In this mode, press the [ F ] key, then press the PTT key, to save the new setting and exit to
normal operation.
Set Item 26 [ DTMF ]
Function: Programming the DTMF Autodialer.
See page 25 for details.
Set Item 27 [ CW ID ]
Function: Program and activate the CW Identifier (used during ARTS operation).
See page 27 for details.
Set Item 28 [ S SRCH ]
Function: Activate the Smart Search feature.
See page 23 for details.
Set Item 29 [ SMT MOD ]
Function: Select the Smart Search sweep mode.
Available Values: SINGLE/CONT
Default: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction starting on the
current frequency. All channels where activity is present (up to 15 in each direc-
tion) are loaded into the Smart Search memories. Whether or not all 31 memo-
ries are filled, the search stops after one sweep in each direction.
CONT: The transceiver makes a sweep in each direction as with the "SINGLE" mode,
but if all 31 channels are not filled after the first sweep, the radio continues
sweeping until they are all filled.
Set Item 30 [ LK MODE ]
Function: Select the Control Locking lockout combination.
Available Values: KEY/DIAL/K+D(KEY+DIAL)/PTT/K+P(KEY+PTT)/
Default: KEY
VX-110 O
PERATING
D+P(DIAL+PTT)/ALL
M
ANUAL
Set Mode
35