Cisco Catalyst Wireless 9166D1 Series Installation Manual page 29

Installation Overview
Table 4: Brackets and Clips for Mounting the AP
Mounting
Type
Brackets
Clips
1
2
3
When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting bracket,
use the lock hasp at the back of the AP to lock it to the bracket.
Part Number
123
CW-MNT-ART2-00
AIR-AP-BRACKET-1
AIR-AP-BRACKET-2
AIR-AP-T-RAIL-R
AIR-AP-T-RAIL-F
AIR-CHNL-ADAPTER
Mount the AP using no less than four screw holes on a bracket.
AIR-AP-BRACKET-3 is not compatible for use with Cisco CW9166D1 access points.
You can also use the in-tile mounting options available from third parties. For more information, see
the access point data sheet.
Cisco Catalyst Wireless 9166D1 Series Wi-Fi 6E Access Point Hardware Installation Guide
Description
Articulating wall or pole mount kit. This kit should be used
along with AIR-AP-BRACKET-2
Low-profile bracket: Used for ceiling-mount installations.
Universal bracket: Used for wall or electrical box
installations.
Ceiling grid clip (recessed mounting). (This is the default
option.)
Ceiling grid clip (flush mounting).
Optional adapter for channel-rail ceiling grid profile.
Mounting the Access Point
21