Security Features; Ethernet Ports; Power Source Options; Factory Reset Button - Cisco MERAKI CW9166D1-MR Manual

2.3 Security Features

The CW9166D1-MR features multiple options for physically securing the access point after installation:
1. Security screw – The accessory kit includes screws that can be used to secure the access
point to the mount plate. Engaging the security screw prevents accidental dislodging and
theft.
2. Kensington lock – The access point contains a hard point that allows it to be secured to any
nearby permanent structure using a standard Kensington lock.

2.4 Ethernet Ports

The CW9166D1-MR features an Ethernet RJ45 port that accepts 802.3af power (labeled "PoE"). This port
should be used for uplink to your WAN connection.

2.5 Power Source Options

The CW9166D1-MR access point can be powered using either the Meraki AC Adapter or 802.3af PoE
Injector (both sold separately) or a third-party 802.3af PoE switch.

2.6 Factory Reset Button

If the button is pressed and held for at least five seconds and then released, the CW9166D1-MR will reboot
and be restored to its original factory settings by deleting all configuration information stored on the unit.
6