Powering The Cw9166D1-Mr With Meraki Ac Adapter - Cisco MERAKI CW9166D1-MR Manual

4.2.2.1 Powering the CW9166D1-MR with the Meraki AC Adapter (sold separately)
1. Plug the power cord into the CW9166D1-MR and the other end into a wall outlet.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the Eth0 port on the
CW9166D1-MR.
4.2.2.2 Powering the M410-MR with the Meraki 802.3at Power over Ethernet Injector (sold
separately)
1. Plug the power cord into the PoE Injector and the other end into wall power.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the "IN" port on the
injector.
3. Route Ethernet cable from the "OUT" port on the injector to the Eth0 port in the cable bay of the
CW9166D1-MR.
14