Viewing License Information; Evaluation License Features - Cisco Catalyst 9800-80 Installation Manual

Viewing License Information

WLC# show running-config
.
.
.
license boot level adventerprise
Table 15: show running-config Command Output Description
Field Name
license boot level adventerprise
Viewing License Information
Use the show license udi command to determine the Universal Device Identifier (UDI) information of your
chassis. This may be required at the time of purchasing a new license.
The following example displays sample output from the show license udi command:
WLC# show license udi
SlotID
--------------------------------------------------------------------------------
*

Evaluation License Features

The following are the features of the 1GE and 10GE Interface Evaluation license:
• There is only one 60-Day Evaluation Period countdown timer for the 10GE port pairs. The timer is
• A EULA will be presented, and must be accepted, the first time you enable any of the ports in order to
• When the 60-Day Evaluation Period expires, the license automatically changes to an RTU license. As
• There can be only one active interface_1g license and one active interface_10g license. Either the
• As with past license implementations, the Permanent license is of higher precedence than the built-in
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
76
Description
Indicates the current requested Cisco lOS license level to boot.
PID
C9800-80-K9 xxxxxxxxxxx
initiated as soon as the first of the port pairs is enabled.
utilize the requested port.
with all other RTU licenses, there is no functionality disruption or accessibility concerns following this
transition.
Permanent License or the EvalRTU License can be Active, but not both.
EvalRTU license. However, when the Permanent license does not have enough port-count (that is, when
the user requests both port pairs but the Permanent License only allows for one port pair), the license
priority changes between the Permanent and Evaluation licenses. In this case, the Evaluation License
becomes Active since it can accommodate both port pairs. The Permanent License will automatically
become Active if and when its port-count meets the user's desired configuration.
SN UDI
C9800-80-K9:xxxxxxxxxxx
License Verification