Steps
1. Remove the screw (M2x3) that secures the solid-state drive to the system board.
2. Slide and remove the solid-state drive from the solid-state drive slot on the system board.
Moving the solid-state drive screw mount
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
solid-state
About this task
The following image indicates the location of the solid-state drive screw mount and provides a visual representation of the procedure to
move the screw mount to another location that accommodates the form factor.
22
Removing and installing components
Before working inside your
drive.
computer.