Table of Contents
Advertisement
Steps
1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the five screws (M2x2) and the two screws (M2x3) that secure the system board to the palm-rest and keyboard assembly.
3. Connect the hard-drive cable, the touchpad cable, the keyboard-backlight cable, and the keyboard cable to their respective
connectors on the system board and close the respective latches.
4. Connect the coin-cell battery cable and the speaker cable to the connectors on the system board.
5. Connect the power-adapter port cable to the system board and close the latch.
6. Connect the I/O-board cable to the system board and close the latch.
Next steps
1. Install the
display
assembly.
2. Install the
heat sink (for integrated graphics)
3. Install the
wireless
card.
4. Install the
memory
module.
5. Install the
solid-state drive/Intel Optane
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure in
62
Removing and installing components
or the
memory.
After working inside your
computer.
heat sink (for discrete
graphics).
Advertisement
Table of Contents
