Solid-State Drive/Intel Optane; Removing The Solid-State Drive - Dell Inspiron 5598 Service Manual

Steps
1. Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x3) the secure the hard-drive assembly to the palm-rest and keyboard assembly.
3. Connect the hard-drive cable to the system board and close the latch to secure the cable.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Solid-state drive/Intel Optane

Removing the solid-state drive

Prerequisites
If your computer is using a SATA storage device accelerated by Intel Optane memory, disable Intel Optane before removing the SATA
storage device. For more information about disabling the Intel Optane, see
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
M.2 2230 solid-state drive
20 Removing and installing components
After working inside your computer.
Before working inside your
Disabling Intel
computer.
Optane.