Panasonic DMC-LC5PP Operating Instructions Manual page 93

\ Troubleshooting
i: The power does not turn on.
1-1: Are the battery and the AC
adaptor correctly connected?
Check the connection.
1-2: Is the battery sufficiently
charged? Use a battery that has
been sufficiently charged.
2: As the power is turned on, it
turns off immediately.
Is the battery charge insufficient
to operate the camera? Charge
the battery or replace it with
charged one.
Has condensation occurred?
Carrying the digital camera from
a cold place to a warm place
could cause condensation form
inside the camera. Wait until
condensation disappears.
2-1:
2-2:
3: The image cannot be
recorded.
3-1: Is the memory card inside?
3-2: The operational mode dial is not
set to REC mode.
: There is no memory capacity left
on the card. Before recording,
delete some images.
4: Theimage is not displayed on
the LCD monitor.
4: Is the LCD monitor set to off?
5: The LCD monitor is too bright
or dark.
5: Adjust the brightness of the LCD
monitor.
8-1:
8-2:
8-3:
ak
9-
9-2:
10:
The display or images on the
LCD monitor are not focused.
Set the focus mode correctly.
The flash does not fire.
The flash mode is set to forced
OFF. Change the flash mode.
The image cannot playback.
ts the memory card inside?
There is no image in the memory
card.
The operational mode dial is not
set to playback [[>]].
The image is not displayed on
the television.
: ts the camera correctly
connected with the TV? Check it.
Set the TV to video input mode.
When connecting to PC,
images cannot be transferred.
: Is the camera correctly
connected with PC? Check it.
93