Xerox Phaser 4510 User Manual page 52

8. Insert the tray into the tray slot, and push the tray completely into the printer.
9. To use the current tray setup, press the OK button on the control panel. If you load a new
type of paper in the tray:
a. Select
Paper Tray Setup
b. Select
Tray 2 Paper
c.
Select Use current setup
setup, or change the paper type:
■ Select
Change setup
■ Select the paper type from the list displayed, and then press the OK button.
Select the paper size, and then press the OK button.
■
See also:
Tray 1 Mode and Tray 2-N Mode
Printing on Specialty Media
Printing Custom Size Paper
, and then press the OK button.
, , or
Tray 3 Paper Tray 4 Paper
if the correct paper type and size is displayed as the current
, and then press the OK button.
on page 3-17
on page 3-25
on page 3-43
Phaser® 4510 Laser Printer
3-16
Loading Paper
4510-079
, and then press the OK button.