Fuser Agent; Developer; Diskettes; Stitcher Wire - Xerox DocuTech 6100 Install Manual

Select and prepare an installation site

Fuser agent

Developer

Diskettes

Stitcher wire

4-28
Fuser agent is a consumable item required by the printer. You
should keep at least one bottle on hand for installation by the
service representative. The consumption rate of Xerox fuser
agent is approximately one bottle per 250,000 pages. For
product information, refer to the consumable supplies table in the
"Maintenance and support services" chapter.
Developer is not consumed by the printer but it does have an
effective life that is dependent upon the number of charged
images printed and the size of the stock. Xerox developer is
guaranteed by Xerox for 500,000 pages of 8.5 x 11 inches (216 x
279 mm or A4) stock. Developer is also a required item you need
to order and keep on hand. It is changed by the service
representative. Use only developer specified for use in your
DocuTech printer. For product information, refer to the
consumable supplies table in the "Maintenance and support
services" chapter.
Diskettes are optional items that provide loading and backup of
fonts and user files to and from the DocuSP controller. The
controller accepts 3.5 inch diskettes.
Stitcher wire is a consumable item for a printer equipped with the
stitcher/stacker option. You need to order stitcher wire reels and
keep them on hand. Stitcher wire A can be installed by the
printer operator. Stitcher wire B is installed by the service
representative or operators who have completed the eXcellerate
workshop offered by Xerox. Refer to the "Maintenance and
support services" chapter for information about training and
supplies.
DocuTech 61xx Installation Planning Guide