Client Networking Software - Xerox DocuTech 6100 Install Manual

Client networking software

DocuTech 61xx Installation Planning Guide
– Novell IPX/SPX network client. This protocol requires that
your network has a Novell server.
• Apple Macintosh, System 8.6 or higher with EtherTalk phase
2.
NOTE: DocuSP software may be compatible with workstation
models and software versions other than those listed above.
Refer to the Xerox Production Print Services documentation for
more information.
Xerox client software, a third-party TCP/IP lpd (line printer
daemon) networking software, or Apple/Macintosh Printer
Access Protocol (PAP) networking software must be installed on
your client workstations. This software provides an interface with
the DocuSP controller which allows you to submit print jobs and
check job status.
NOTE: The DocuTech printing options available to a client user
vary according to the networking software loaded on the client
workstation.
For additional information on submitting jobs from a client
workstation, refer to the appropriate client documentation
provided with your system.
Overview
2-5