Client Software - Xerox DocuPrint 4850 NPS System Overview Manual

SYSTEM OVERVIEW

Client software

Ethernet LAN
1-4
— Sun Personal Computer–Network File Services (PC-NFS),
version 5.1
•
IBM RS/6000 running IBM AIX, version 4.1
•
HP/Apollo running HP-UX, version 10.01
•
DECStation 5000/200 running DEC Ultrix, version 4.3
•
Apple Macintosh, System 7, 7.5, or 8.x, using AppleTalk
through EtherTalk, phase 1 or 2
•
Any system that supports RFC-1179 lpr/lpd.
DocuPrint software may be compatible with workstation models and
software versions other than those listed above.
On your PC or workstation, you must install or setup a supported
means of submitting jobs to DocuPrint NPS. Depending on your
system, you can use the following:
•
Xerox drivers for Windows 3.x, 95/98, or NT
•
Xerox Document Submission Software for DOS, Windows 3.x,
95/98, NT, or Macintosh
•
Third-party drivers
— Some PostScript drivers can be used in conjunction with
Xerox-supplied PPD files
— HP Color LaserJet for PCL 5c jobs
— HP LaserJet 4 for monochrome jobs
•
Third-party TCP/IP lpd utility
•
Apple/Macintosh Printer Access Protocol (PAP)
The Xerox-provided software provides an interface with the Printer
Controller, which allows you to submit print jobs and check job status.
Note: The DocuPrint printing options available to a client user vary
according to the networking software loaded on the client
workstation.
For additional information on submitting jobs from a client
workstation, refer to the job submission documentation.
Users of networked client workstations may send print jobs to the
DocuPrint NPS printer over the Ethernet LAN using either the TCP/
IP, AppleTalk using EtherTalk Link Access Protocol (ELAP), or
Novell NetWare as the network protocol.
Regardless of printing or transmission protocol, the Ethernet
connection to the Printer Controller must be compatible with the
Institute of Electrical and Electronics Engineers (IEEE) 802.3
standard.
XEROX DOCUPRINT 4850/4890 NPS SYSTEM OVERVIEW GUIDE