Xerox DocuPrint P1210 User Manual page 24

P1210UG-8 6/30/00 3:59 PM
I N S T A L L I N G O P T I O N A L M E M O R Y
1.22
U s e r G u i d e
Page 1.22
4
5
6
7
Push back on the SIMM until it clicks into
place. (Make sure the SIMM is secured in
place by the metal clips.)
Replace the side cover and tighten the two
outer screws.
Reconnect the power cord and printer cable.
Turn the power on.
Print a configuration sheet (hold down the
print button until all lights blink, then
release). Confirm the new memory value
on your sheet.