Emerson Rosemount 3144P Quick Start Manual page 6

Quick Start Guide
6. Mount the transmitter to a 2-in. (50 mm) pipe or a panel using
one of the optional mounting brackets.
7. Attach cable glands to the shielded cable running from the
connection head to the transmitter conduit entry.
8. Run the shielded cable from the opposite conduit entry on the
transmitter back to the control room.
9. Insert shielded cable leads through the cable entries into
the connection head/transmitter. Connect and tighten cable
glands.
10. Connect the shielded cable leads to the connection head
terminals (located inside the connection head) and to
the sensor wiring terminals (located inside the transmitter
housing).
6
January 2024
Rosemount 3144P