Emerson Rosemount 3144P Quick Start Manual page 14

Quick Start Guide
Table 4-2: AI Block Parameters
Configure one AI Block for each desired measurement.
Parameter
CHANNEL
LIN_TYPE
XD_SCALE
OUT_SCALE
14
Comments
Choices:
1. Sensor 1 Temperature
2. Sensor 2 Temperature
3. Differential Temperature
4. Terminal Temperature
5. Sensor 1 Min. Value
6. Sensor 1 Max. Value
7. Sensor 2 Min. Value
8. Sensor 2 Max. Value
9. Differential Min. Value
10. Differential Max. Value
11. Terminal Temp Min. Value
12. Terminal Temp Max. Value
13. Hot Backup
This parameter defines the relationship between the
block input and the block output. Since the transmitter
does not require linearization, this parameter will always
be set to No Linearization. This means that the AI block
will only apply scaling, filtering, and limit checking to the
input value.
Set desired measurement range and units. Units must
be one of the following:
• mV
• Ohms
• °C
• °F
• °R
• K
For "DIRECT" L_TYPE, set OUT_SCALE to match XD_SCALE
January 2024
Rosemount 3144P