Using The Configuration Wizard - Xerox DocuColor 8000 Software Installation Manual

24
The

Using the Configuration Wizard

To make sure that the changes take effect, restart the Spire CXP8000 color
4.
server. On the Windows desktop, follow the path:
Start > Shut Down > Restart > OK
You have completed Disk Striping.
After the computer restarts, the Configuration Wizard appears.
5.
Note: If a message appears requesting you to activate Windows XP, ignore
it until you have completed configuring the system. For more information,
see Activating Windows XP on page 38.
•
If configuration recovery information is available, proceed to Restoring the
Configuration on page 34.
•
If there is no backup and the system configuration must be done manually,
proceed to Configuring the Spire CXP8000 Color Server for the First Time on
page 25.
The Spire CXP8000 color server Configuration Wizard automatically appears after
the installation is complete. It provides the following two options:
•
First time configuration—when no backup is available or recovery fails
•
DFE configuration recovery—when a backup is available
Follow the steps in the wizard to complete the relevant Spire CXP8000 color server
configuration.
Note: During the configuring process, when prompted to restart your computer,
click No. At the end of the Configuration Wizard, you will be prompted to restart
your system.
Spire CXP8000 Color Server 1.0 Software Installation Guide
.