Reinstalling The Creo Application Software; Disk Striping - Xerox DocuColor 8000 Software Installation Manual

Reinstalling the Spire CXP8000 Color Server Software

Reinstalling the Creo Application Software

Disk Striping

The
Insert CD #2 into the DVD-ROM drive.
1.
In the SPIRE application splash screen that appears, click
2.
The Adobe Acrobat setup begins.
After the Adobe Acrobat setup is complete, the Spire CXP8000 color server
3.
installation starts.
When the License Agreement window opens, click
4.
CXP8000 color server installation.
When the installation is complete, remove CD #2 from the
5.
DVD-ROM drive.
Click to restart the computer.
6. Finish
Proceed to Disk Striping.
Once the Spire CXP8000 color server restarts, the Wrong Disk Configuration
message appears. This message indicates that the disks need to be striped.
Note: If a message appears requesting you to activate Windows XP, ignore it
until you have completed configuring the system. For more information, see
Activating Windows XP on page 38.
Initial Disk Striping Procedure
Note: If the Wrong Disk Configuration message appears, perform the Initial Disk
Striping procedure. If the Image Disks File System is not Formatted message
appears, proceed to step 3 of the Confirming the Disk Striping procedure on
page 23.
In the following message, click
1.
to continue the Spire
Yes
OK.
15
.
Start