Assignment Of Tasks During And After Installation - Xerox 4235 Installation Planning Manual

Assignment of tasks during and after installation

Select an operator
Tasks
XEROX 4235 LPS INSTALLATION PLANNING GUIDE
You must select one or more operators and assign tasks to be
performed during and after your 4235 LPS installation. Tasks
include transmitting test jobs from the host computer system,
loading optional fonts, and identifying the 4235 LPS to your
host computer system.
You may want to designate an individual as the person
responsible for the care of your 4235 LPS, or you may want to
select a number of people so you have enough operators to
cover absences, such as vacations and illness.
Operators receive maintenance training on installation day in
order to perform the following tasks:
Power on the 4235 LPS.
Update the operating system files when required.
Add paper.
Change the dry ink cartridge.
Change the print cartridge.
Clear paper misfeeds and jams.
Use the Xerox 4235 Laser Printing System Problem Solving
Guide to correct faults.
Perform logon procedures when necessary.
Report non–correctable fault conditions to the Xerox service
representative.
Once the 4235 LPS is installed, you should test it to ensure that
it is working properly. The following three tasks should be
performed:
Transmitting a test job
Loading fonts
Identifying the 4235 LPS to the host computer system.
INSTALLATION PLANNING TASK
2-7