Table of Contents
Advertisement
Planning for the installlation
Installation planning tasks
Before scheduling delivery of the DocuTech 65/DocuPrint 65 system
1-4
To aid you in installation planning, this section provides a list, describing tasks
you and your Xerox representative must complete in the days before
scheduling installation. If you have questions about any of these activities,
contact your sales or service representative.
The following activities should be completed before you schedule a delivery
date for the DocuTech 65/DocuPrint 65 Printer:
•
Select a location for the DocuTech 65/DocuPrint 65 Printer.
•
Prepare the site:
–
Install any required electrical service. Order Xerox receptacle kits if
required. Refer to the section, Electrical Requirements if necessary.
–
Install any required Ethernet hardware.
–
Reserve a network address and hostname for each DocuSP
controller workstation.
•
Identify networked client workstations that will submit jobs. Ensure that
the hardware, operation system, and network protocols are supported by
the DocuSP control.
After the preceding activities are complete, schedule a delivery date for the
DocuTech 65/DocuPrint 65 Printer. This should be done with your Xerox sales
representative.
Installation Planning Guide
DocuTech 65/DocuPrint 65
Advertisement
Table of Contents
