Parallel Interface - Xerox 4215 Installation Planning Manual

Parallel interface

Parallel interface connector
XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE
The parallel interface is a Centronics compatible interface capable
of running at speeds up to 150 kbytes per second with burst
speeds of up to 200 KB per second.
The Centronics parallel interface uses a standard 36-pin female
Centronics cable connector as shown in figure B-3. Xerox
recommends that you use the Xerox Centronics 10-foot parallel
cable, part number 9R89336, or the cable recommended by your
personal computer manufacturer.
Figure B-3. Centronics interface connector
INTERFACE SUPPORT
B-3