Preparing The Installation Checklists - Xerox 4215 Installation Planning Manual

Completing Checklist 3: General setup
Display Language
XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE
5.
This chapter explains the printing parameter options listed on the
installation checklists numbered 3 through 6 in the "Checklists"
appendix. Use this information as you complete the installation
checklists. Your Xerox sales representative will assist you as
needed. On installation day your Xerox service representative
uses the checklists to configure your 4215/MRP and 4219/MRP
Mid Range Systems Printers.
This chapter does not provide information on Checklists 1, 2, or
7. Refer to the "Preinstallation" chapter for information required
to complete Checklists 1 and 2, and the "Ordering fonts,
options, and supplies" chapter for information on checklist 7.
The printer options described in this chapter are configured
through the 4219/MRP and 4215/MRP control panel and interface
cards. Follow the procedures in the Xerox 4219/MRP and
4215/MRP Mid Range Systems Printers Operator Guide to
change initial printer settings, if necessary, at a later date.
To prepare the installation checklists, follow the steps below.
Your Xerox sales representative will assist you.
1. Match the checklist title to the sections within this chapter.
2. Use the descriptions provided in this chapter as guidelines
while you complete each checklist.
The printer setup options listed below allow you to define the
User Interface display language and the input and output features
of the 4219/MRP and 4215/MRP on Checklist 3: General setup.
Select one of the languages listed below as the default for the
user interface:
English (default)
•
Francais (French)
•
Español (Spanish)
•
Italiano (Italian)
•
Deutsch (German).
•
Tray select Allows you to select the default input paper tray:
• Upper (default)
• Middle (4219 only)
• Lower.
Preparing the installation
checklists
5-1