Memory Management - YASKAWA VIPA HMI 62M-JIDR Manual

Hardware description
Structure > Memory management
MPI/PROFIBUS DP inter-
face
Ethernet connection
"Host"-USB-A
"Slave"-USB-B
Power supply

2.3.3 Memory management

Overview
Work memory
12
9 pin SubD jack
An RJ45 jack provides the interface to the twisted pair cable, required for Ethernet.
Using the "Host"-USB-A interface USB mouse, keyboard, stick or USB hard discs can be
connected.
For project transfer with Microsoft ActiveSync a programming cable can be connected
using the "Slave"-USB-B interface.
The USB-A interface of your PC can be connected to the "Slave"-USB-B interface of your
Touch Panel deploying the USB programming cable.
The USB programming cable is delivered by VIPA with order No. 670-0KB10.
The Touch Panel has got an integrated power supply. The power supply has to be pro-
vided with DC 24V (20.4 ... 28.8V). For this you find an according DC 24V slot on the
bottom side.
The power supply is protected against inverse polarity and overcurrent. The battery for
the clock of the Touch Panel is an accumulator with a suitable charging circuit. This accu-
mulator is maintenance-free and does not need to be exchanged within the life span of
the Touch Panel.
The following memory systems are available for every Touch Panel:
n 256Mbyte work memory
n 512Mbyte user memory (ca. 380Mbyte for user data)
n USB storage media connected via "Host"-USB-A interface
n Slot for CF (Type II)
n Slot for MMC/SD
Please only use memory cards formatted with FAT(32)!
Every Touch Panel has a work memory with a size of 256Mbyte. The work memory is not
buffered and is deleted after shut down. Please consider that also registry entries are
stored in the work memory that are set back to default settings after the next re-boot. You
can save them permanently by means of the KuK Tools (within consignment).
HB160 | TP | 62M-JIDR | en | 17-11
VIPA HMI