Xerox WorkCentre 4118 System Administration Manual page 83

Test Print
To ensure Internet Services has been setup correctly a test print should be submitted from a
client workstation. Perform the following steps:
Create a print-ready PostScript, PCL, or ASCII text file and save it on a client workstation.
1
From a workstation that is connected to the Internet or an Intranet, use a Browser to
2
access the WorkCentre 4118 embedded HTTP Server Home Page.
In the URL field, enter the IP Address of the WorkCentre 4118.
3
Example: If the IP Address is 192.168.100.100, enter the following in the URL field:
Verify that files can be sent from the workstation to the WorkCentre 4118 and that they
4
print.
The Internet Services installation process is now complete.
5
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
Xerox WorkCentre 4118 System Administration Guide
http://192.168.100.100
At the CentreWare Internet Services homepage for the WorkCentre 4118 select
the [Print] tab.
From the Print-Ready File section choose the [browse] button and browse to
your print ready file.
Click the [print] button.
Page 7-21