Electrical Requirements - Maytag MHN30PD Installation Instructions Manual

Commercial front-load washer
Table of Contents

Advertisement

Available languages

Available languages

Electrical
Requirements
Dangerous Voltage
Electric
Shock Hazard
Plug into an earthed socket outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death,
fire, or electric
shock.
EARTHING
iNSTRUCTiONS
This washer must be earthed. In the event of a malfunction
or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-earthing
conductor and an earthing plug. The
plug must be plugged into an appropriate outlet that is
properly installed and earthed in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
earthing conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
NOTE: Electrical safety standards: The manufacturer
has
chosen compliance
with EC/EN.60335
standards as the most
appropriate
for this product.
[]
Sound Pressure Level, Lpa: 58 dbA (uncertainty,
Kpa: +/-3.6 dbA)
[]
A 220-240V, 50 Hz., fused electrical supply is required. A
time-delay 10-16A fuse or circuit breaker is recommended.
[]
This washer is equipped with a power supply cord having
a 3 prong earthed plug.
[]
To minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, grounding-type
outlet,
grounded in accordance with local codes and ordinances.
If a mating outlet is not available, it is the personal
responsibility
and obligation of the customer to have the
properly grounded outlet installed by a qualified electrician.
[]
If codes permit and a separate ground wire is used, it is
recommended
that a qualified electrician determine that the
earth path is adequate.
[]
If the supply cord is damaged, it must be replaced by the
manufacturer,
its service agent, or a qualified person to
avoid a hazard.
[]
Do not earth to a gas pipe.
[]
Check with a qualified electrician if you are not sure the
washer is properly earthed.
[]
Do not have a fuse in the neutral or earth circuit.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhn30pn

Table of Contents