Changing Engine Oil And Fuel Filter - Miller Wildcat 200 Owner's Manual

8-4. Changing Engine Oil And Fuel Filter

3
4
1
OM-237 711 Page 34
.
Full
2
A complete Parts List is available at www.MillerWelds.com
!
Stop engine and let cool.
1 Oil Drain Valve
2 1/2 ID x 12 in. (305 mm) Hose
Change engine oil according to en-
gine owner's manual.
NOTICE − Close valve and valve
cap before adding oil and running
engine
Fill crankcase with new oil to full
mark on dipstick (see Section 5-4).
3 Fuel Filter
4 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
!
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
Tools Needed:
805 396 / Ref 803 228