Xerox FaxCentre 2121 User Manual page 135

Maintenance
Code 0B - Wrong number of pages
There is a difference between the number of pages indicated during preparation for the
transmission and the number of pages sent; check the number of pages in the
document.
Code 0C - Received document error
Ask the subscriber who called you to check the length of the document (it may be too
long to be completely received).
Code 0D - Transmission failed
Ask the sender to resend the document.
Code 13 - Memory full
Your fax can no longer receive any new transmissions because the memory is full.
Empty the fax memory by printing the received documents and deleting or transmitting
the documents in the transmission queue.
Code 14 - Memory full
Received document memory full.
Code 15 - Unknown mailbox number
You have sent a document to an unrecognised subscriber's mailbox.
Code 16 - No Relay Bcst list Nr x
You requested a document relay from a remote fax but the fax has not programmed
the list of subscribers requested.
Code 17 - Unknown mailbox number
You have sent a document to an unrecognised subscriber's mailbox.
Code 18 - Relay Bcst impossible
You have requested a document relay from a remote fax which does not have the relay
broadcast function.
Code 19 - Subscriber has stopped
Transmission has been stopped by your subscriber.
Code 1A - Disconnected
The transmission has not started. The telephone line is busy.
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend the document.
7-17