Security - Supermicro X13DEG-OA User Manual

4.6 Security

This feature allows you to configure the following security settings for the system.
Disable Block Sid (Available when your storage devices supports TCG)
Select Enabled to allow SID authentication be performed in TCG Storage devices. The options
are Disabled and Enabled.
The following information is displayed:
•
Administrator Password
•
User Password
•
Password Description
Administrator Password
This feature indicates if an administrator password has been installed. It also allows you to
set the administrator password which is required to enter the BIOS Setup utility. The length
of the password should be from three characters to 20 characters long.
User Password (Available when "Administrator Password" has been set)
This feature indicates if a user password has been installed. It also allows you to set the user
password which is required to enter the BIOS Setup utility. The length of the password should
be from three characters to 20 characters long.
Note: For more information on Security Boot configuration and Secure Erase
instructions, please refer to Security Boot Configuration User's Guide and Secure
Erase Instructions User's Guide posted on the web page under the link:
supermicro.com/support/manuals/.
155
Chapter 4: UEFI BIOS
https://www.