Table of Contents
Advertisement
Motherboard Features
CPU
•
Supports dual 4th/5th Gen Intel Xeon Scalable Processors (Socket E LGA 4677) with four UPIs (20GT/s max.) and a
thermal design power (TDP) up to 350W
•
Max Series (HBM) SKUs are supported
Memory
•
Supports up to 8TB 3DS RDIMM/RDIMM DDR5 (288-pin) ECC memory with speeds up to 5600MT/s (1PDC) or 4400MT/s
(2DPC) in 32 DIMM configuration (Note below)
Note: Memory speed and capacity support depends on the processors used in the system.
DIMM Size
•
Up to 256GB at P12V
Note: For the latest CPU/memory updates, please refer to our website at
motherboards.
Chipset
•
Intel PCH C741
Expansion Slots
•
Twenty PCIe 5.0 x8 LP SlimSAS via GenZ 4C/MCIO connectors
•
Two NVMe PCIe 3.0 x2 M.2 ports (with M-Key 2280 and 22110 support)
•
Eight SATA 3 (2 SlimSAS x4) ports with RAID (0, 1, 5, 10) support
•
Two PCIex 5.0 x16 Slim-AIOM via GenZ 4C+/MCIO connector
Baseboard Management Controller (BMC)/Network
•
ASPEED AST2600 BMC
•
One dedicated BMC LAN/VGA (via AST2600 BMC HW RoT)
Graphics
•
Graphics controller and VGA support via ASPEED AST2600 BMC
I/O Devices
•
One VGA header (JFP2): used for dedicated VGA via BMC and for front accessible VGA connection
•
I/O riser card slot
One
(dedicated BMC LAN) connections
Peripheral Devices
•
Two USB 2.0 ports on the I/O riser board via a cable
BIOS
•
AMI SPI BIOS
•
EFI GUI, SPI dual/quad speed control, riser card auto detection support, RTC (Real Time Clock) wakeup, IPMIView,
SMCIPMITOOL, IPMI CFG, Redundant power supply unit detection, SPM, SUM-OOB/InBand
Motherboard Features
(JSLOT): used for I/O mezzanine card via a cable which provides VGA/COM/USB*2/RJ45
15
Chapter 1: Introduction
https://www.supermicro.com/en/products/
Advertisement
Table of Contents
