Supermicro X13DEG-OA User Manual page 159

•
HDD User Pwd Status:
•
HDD Master Pwd Status:
Set User Password (Available when "Security Frozen:" above is No)
Select Enabled to support Lockdown Mode that will prevent existing data or keys stored in the
system from being altered or changed in an effort to preserve system integrity and security.
The options are Disabled and Enabled.
Note: For more information on Secure Erase instructions, please refer to the Secure
Erase Instructions User's Guide posted on the web page under the link:
supermicro.com/manuals/other/X11_X12_X13_B11_B12_B13_H11_H12_BH12_H13_
Secure_Erase_Guide.pdf.
Secure Boot
Note: For detailed instructions on how to configure Security Boot settings, please refer
to the Security Boot Configuration User's Guide posted on the web page under the
link: https://www.supermicro.com/manuals/other/X11_X12_X13_B11_B12_B13_H11_
H12_BH12_H13_Secure_Erase_Guide.pdf.
The following information is displayed:
•
System Mode
•
Secure Boot
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CSM Support
If this feature is set to Enabled, legacy BIOS boot mode will be supported by the system.
Please make suer you use the device with compatibility support for legacy boot. The options
are Disabled and Enabled.
Enter Audit Mode (Available when "Secure Boot Mode" is set to
Custom)
Select Ok to enter the Audit Mode workflow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
159
Chapter 4: UEFI BIOS
https://www.