Locking The Brake - Cub Cadet 108 Operator's Manual

Retighten the cap screws after the seat is adjusted.
NOTE: The battery is located in a well under the
operator's seat for ease in servicing or replacement
when necessary.
CLUTCH AND BRAKE PEDAL
Brake pedal lock in the engaged position.
Adjusting the seat.
LOCKING THE BRAKE
Always lock the brake when the tractor is parked
on a grade. To lock the brake, press down on the
pedal; then place the brake pedal lock in the
engaged position. To disengage the lock, press
down on the pedal, lift the lock up and place it in
the disengaged position.
Before starting the tractor, adjust the seat to the
most comfortable driving position. Tile the seat
forward over the steering wheel, loosen the four
cap screws in the seat support, and slide the seat
assembly forward or rearward to the position
wh ich is most comfortable for the operator.
12