Mitel 6920 Quick Reference Manual page 4

Mitel 6920/6920w SIP Phone - Quick Reference Guide
QUICK REFERENCE GUIDE
3. When your mobile phone has been discovered, use the navigation keys to highlight
the respective entry in the list of available devices and press the Select button or Pair
softkey.
A Bluetooth pairing request displays on both the Mitel 6920 SIP Phone and your
mobile device.
4. Ensure the pairing code matches on both devices and press Yes on the Mitel 6920
SIP Phone and acknowledge the pairing request on your mobile phone.
The Mitel 6920 SIP Phone attempts to pair the mobile phone and if successful,
automatically attempts to connect to the mobile phone.
Note: If pairing or connecting fails, a failed error message displays on screen. Press Retry to attempt to
pair or connect again, or Cancel to cancel the attempt.
Press OK to acknowledge the successful connection.
The connected mobile phone is added to the list of Paired Devices and is ready to use.
Syncing mobile contacts
The Mitel 6920 SIP Phone automatically attempts to sync your mobile contacts to the
Directory application upon pairing and connection.
To manually update your mobile contacts:
1. Press the key to access the Directory application.
2. Navigate to the Mobile contacts folder.
3. Press the Reload softkey.
© Copyright 2023, Mitel Networks Corporation. All Rights Reserved.
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel's website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
The Mitel 690 SIP Phone attempts to re-synchronize and update your mobile contacts.
Note: If the update fails, a failed to retrieve contacts message displays on screen. Press Retry to
attempt to update again, or Cancel to cancel the attempt.
Answering an incoming mobile call using your Mitel 6920 SIP Phone
When your mobile phone is paired and connected to your Mitel 6920 SIP Phone,
incoming calls on your mobile phone will be indicated on your 6920 SIP Phone as well.
Note: A Mobile softkey must be configured to answer an incoming mobile call using your Mitel 6920
SIP phone. For more information, refer to the Mitel 6920 SIP Phone User Guide.
Lift the handset or press the
softkey for handsfree operation.
Moving the audio of an active mobile call between your mobile phone and
Mitel 6920 SIP Phone
Press the Push call softkey to push the mobile call's audio from your Mitel 6920 SIP
Phone to your mobile phone
or
Press the Mobile softkey to pull the mobile call's audio from your mobile phone to
the Mitel 6920 SIP Phone.
You can push and pull mobile call audio from the Mitel IP Phone only.
key, blinking Bluetooth Line key, or Answer